Beware of Leaks in the House When the Rain Comes, Make No Drop Anti-Leak Coating Paint the Solution

Kapanlagi.com - Since the beginning of this year, the rainy season has started to occur in Indonesia. Several areas have even been hit by heavy rain several times. It is not uncommon for this to also trigger sudden floods in several locations. Although this rain is often anticipated, sometimes it also causes worry.

How not, after a long absence of rain, the house seems to be fine. But when it rains, leaks suddenly occur everywhere. When this happens, not only do you need a bucket to collect rainwater drops. But, homeowners also need to be quick in finding out the cause of the leakage.

In addition, take advantage of anti-leak coating paint, such as No Drop from Avian Brands, because it can be a solution to overcome leakage problems in the house during the rainy season. Here are some of its advantages!

1. No. 1 Anti-Leak Coating in Indonesia

No Drop is the #1 Anti-Leak Coating in Indonesia that has elastic properties, waterproof, and weather resistant, thus protecting #RekanNoDrop from the danger of leaks inside the house. Interestingly, No Drop can be used on bathroom walls, side walls of the house, zinc or asbestos, ridges, roofs, gutters or joints, and even concrete roofs.

Not only that, No Drop also functions as a decorative product, as it has many attractive color choices. There are a total of more than 10,000 color choices. In addition, No Drop still has many features and advantages, such as providing 7 years of protection, covering hairline cracks, anti-fungal and moss, elastic, and having the best coverage power. Equally important, #NoDrop is also alkali and efflorescence resistant, thus providing extra protection for residential areas.

2. How to Use No Drop for Maximum Results

Before starting the painting process, make sure the surface is dry and clean, free from dust, oil, peeled paint, and other contaminants. Remove peeled or damaged paint completely. After that, clean the mold and moss using Lenkote Biocidal Wash according to the instructions.

Once done, proceed with preparing the No Drop product. Make sure the product is stirred and mixed thoroughly before use. Dilute the product with water by 10% to 20% for the first coat. For the second coat, no dilution is needed.

Once the paint is ready, start applying No Drop to the desired object. If the purpose is to create a leak-proof coating for walls, concrete, asbestos, and plaster surfaces, apply 2 coats of No Drop Bitumen Black.

For galvanized or zinc surfaces, apply 1 coat of Active primer as the base layer to achieve good adhesion. After drying, apply No Drop Bitumen without dilution until a minimum dry thickness of 250 microns is achieved.

Meanwhile, to repair cracks or joints < 2 mm, apply 1 layer of diluted No Drop with approximately 10% water as a base coat. Attach No Drop Membrane to strengthen the joints, let it dry halfway. Then, apply No Drop without dilution.

The drying time depends on the availability of air circulation, room temperature, the thickness of the paint film, and the number of paint layers. Touch-dry time takes about 30 minutes, while complete drying takes about 24 hours. Meanwhile, the minimum drying time for the next coating is 2 hours.

After use and if there is still remaining, it is advisable to store No Drop in a closed container in a cool and dry place. Keep away from direct sunlight and excessive heat to maintain the quality of the product and can be used again when needed. Get more information about No Drop by following the Instagram and Facebook Page No Drop @nodropindonesia.

(kly/tmi)