Looking for Weatherproof Exterior Paint? No Drop Anti-Leak Coating Paint is the Winner

Kapanlagi.com - Although it is already the rainy season, the weather conditions lately are still uncertain. Because rain does not always come every day. When it doesn't rain, the weather is very humid and scorching hot. This can also have a negative impact on buildings, especially the exterior of the house.

If you don't use weatherproof exterior paint, the risk of building damage becomes even greater in this uncertain weather. The most common problem is that when it rains, the house suddenly starts leaking. That's why it's important to choose the right weatherproof exterior paint, like No Drop from Avian Brands. When the rain comes, #NoDrop remains the champion, why?

1. Advantages of No Drop from Avian Brands

No Drop has elastic properties, is waterproof, and weather resistant, so it can protect #RekanNoDrop from leakage dangers inside the house. No Drop can be used on bathroom walls, side walls of the house, zinc or asbestos, wuwungan, roofs, gutters or connections, and even concrete roofs.

In addition, No Drop also functions as a decorative product, as it has many attractive color options. There are over 10,000 color choices in total. No Drop also provides 7 years of protection, covers hairline cracks, is anti-fungal and moss, elastic, and has the best coverage power.

Equally important, #NoDrop is also alkali and efflorescence resistant. With a host of features and advantages, it is not surprising that No Drop is recognized as the number one #AntiLeakCoating in Indonesia.

2. Preparation Before Painting Using No Drop

First, make sure the surface is dry and clean, free from dust, oil, peeled paint, and other contaminants. Remove peeled or damaged paint until clean. After that, clean the mold and moss using Lenkote Biocidal Wash according to the instructions.

After that, proceed with preparing the No Drop product. Make sure the product is stirred and mixed thoroughly before use. Dilute the product with water by 10% to 20% for the first coat. As for the second coat, no dilution is needed.

3. Proper Way to Apply No Drop Paint

If the paint is ready, start applying No Drop to the desired object. If the purpose is as a leak-proof coating for walls, concrete, asbestos, and plaster surfaces, apply 2 coats of No Drop Bitumen Black.

For galvanized or zinc surfaces, apply 1 coat of Active primer as a base layer to achieve good adhesion. After drying, apply No Drop Bitumen without dilution until a minimum dry thickness of 250 microns is achieved.

As for repairing cracks or joints < 2 mm, apply 1 coat of diluted No Drop with water by approximately 10% as a base coat. Attach No Drop Membrane to strengthen the joint, let it dry halfway. Then, apply No Drop without dilution.

4. Dry Time and How to Store No Drop Paint

Meanwhile, the dry time greatly depends on the availability of air circulation, room temperature, thickness of the paint film, and the number of paint layers. Touch dry time takes about 30 minutes, while complete drying takes around 24 hours. The dry time for the next coating is a minimum of 2 hours.

After use, it is recommended to store No Drop in a closed container in a cool and dry place. Keep it away from direct sunlight and excessive heat to maintain the quality of the product and be able to use it again when needed.

It's not difficult to apply, right? So, don't hesitate to use No Drop now. Because No Drop can act as waterproof paint, weather-resistant paint, and of course, a leak-proof coating. Get more information about No Drop by following the Instagram account and Facebook Page No Drop @nodropindonesia.

(kly/tmi)