4 Ways to Clean Your Phone Case Based on Its Material, Don't Just Use Cleaning Liquid

Kapanlagi.com - Mobile phones or cell phones are one of the things that are always carried everywhere. It's no wonder, besides being a communication tool, phones are now often considered as a fashion accessory. Therefore, many people really pay attention to the condition of their phones. It is proven that when dirty, people immediately rush to use any method to clean the phone casing to make it look like new again.

However, cleaning the phone casing should not be done carelessly. Instead of becoming clean and looking like new, cleaning methods that are done haphazardly can actually scratch the phone casing and leave scratches. Cleaning the phone casing must be done carefully and adjusted to the type of material.

In addition, sometimes there are types of stains that can only be cleaned with specific tips or methods. Therefore, it is important to know the correct way to clean the phone casing. Summarized from various sources, here are some ways to clean the phone casing below.

1. How to Clean Plastic Phone Case

(credit: unsplash)

Most phone cases nowadays are made of plastic. Plastic cases are known to be more durable and easy to clean. The easiest way to clean a plastic phone case is by using cleaning solution such as dish soap or bleach. For more detailed instructions, here are the materials and steps to clean a plastic phone case.

Materials needed:

- Dish soap or bleach

- Water

- Sponge or cloth or old toothbrush

- Gloves

Steps to clean a plastic phone case:

1) Use gloves to avoid irritation from soap or bleach.

2) Dissolve 1 tablespoon of bleach or dish soap in a glass of water.

3) Submerge the phone case in the solution of water and soap or bleach.

4) After soaking for about 10 minutes, lift the phone case and rinse it thoroughly.

5) If stubborn stains are still present, you can scrub using a sponge, cloth, or toothbrush. Then rinse it clean.

6) Dry it using tissue or cloth.

7) Let it sit for approximately 1.5 hours before putting it back on the phone.

2. How to Clean Rubber or Silicone Phone Cases

(credit: unsplash)

Besides plastic, phone cases made of rubber or silicone are also quite common. Not much different from plastic, rubber is also considered a durable material. Another advantage is that rubber phone cases tend to be softer, making them very comfortable to hold. So, how do you clean a rubber or silicone phone case? Just follow the materials and steps below.

Tools and materials needed:

- Dish soap

- Baking soda

- Hot water

- Cloth, sponge, or toothbrush

- Bowl

Steps to clean a rubber or silicone phone case:

1) Pour 1 tablespoon of dish soap and hot water into a bowl. Then, stir until evenly mixed.

2) Dip the sponge, cloth, or toothbrush you are using into the bowl.

3) Then, scrub every dirty part of the phone case.

4) For stubborn stains, you can also apply a paste made of baking soda (made by mixing hot water and baking soda in a ratio of 1:3).

5) Once the scrubbed stains are gone, you can rinse it off until clean.

6) Dry it with a tissue or cloth. Then, let it sit for about 1 hour before reattaching it.

3. How to Clean Leather Phone Cases

(credit: unsplash)

Although rare, there are now phone cases made of leather. They give a vintage and classy impression. Unfortunately, cleaning leather phone cases requires caution. Curious about how to do it? Let's find out, the tools, materials, and steps below.

Tools and materials needed:

- Warm water

- Hand soap

- Cloth

- Conditioner or mink oil (if available)

Steps to clean leather phone cases:

1) Mix warm water and hand soap in a container.

2) Dip the cloth into the mixture of warm water and hand soap. Then, wipe the phone case with the cloth.

3) After that, you can dry it with conditioner and apply mink oil (if available) to maintain its moisture.

4. How to Clean Wooden Phone Cases

(credit: unsplash)

Not much different from leather cases, wooden phone cases are also quite unique to wear. In addition, wooden phone cases are considered durable and can be cleaned using any cleaning agent. However, it should be noted that wooden phone cases should not be soaked. For more details, here are the tools, materials, and steps to clean wooden phone cases.

Tools and materials needed:

- Water

- Vinegar

- Dish soap

- Spray bottle

- Cloth

Steps to clean wooden phone cases:

1) Mix water and vinegar in a spray bottle with a ratio of 1:2. Make sure the mixture is well blended. You can also add a few drops of dish soap if there are stubborn stains on the case.

2) Spray the vinegar water solution onto the phone case, then clean it by wiping it with a cloth.

3) After cleaning, you can dry it immediately using a towel or tissue. For best results, you can repeat this process once a week.

Those are 4 ways to clean phone cases based on their materials. Hopefully, this information is useful and good luck trying it out!

(kpl/gen/psp)